Peavey TransChorus 210 Manuel d'utilisateur télécharger pdf (Page 6)

Depth (18)

Adjusting this control clockwise will result in an increase in the depth or intensity of the chorus

effect. This control adjusts the amount of chorus you actually hear from the output of the amp.

T. Dynamics

(19)

This control adjusts the usable power of the internal power amps from 10% (counter clockwise) to

100% (clockwise). Rotating this control clockwise will result in more available power. This effect is

often set to lower levels in order for the power amp compression simulation to be more apparent,

allowing you to overdrive the power amp at lower volume levels, achieving a tube power amp

clipping/compression quality.

Power LED (20)

Illuminates when power is supplied to the amp. If this LED is lit, the amp is on.

REAR PANEL

Power Switch (21)

Placing this switch in the ÒONÓ position will result in power being supplied to the unit. The Power

LED (20) will illuminate when the amp is on.

Stereo Headphone (22)

This 1/4Ó stereo output jack is designed to accommodate standard, stereo headphones. Plugging

a set of headphones into this jack will disconnect the signal going to the power amplifiers of the

unit, and no output can be heard from the unitÕs speakers. This feature provides an excellent

practice tool.

Power Amp In (23)

These left and right mono 1/4" jacks provide an input to each of the power amplifiers. When used

in conjunction with the Preamp Out jacks (24), a stereo effects loop is formed allowing the use

of stereo delays and various effects.

Preamp Out (24)

These left and right mono 1/4" jacks provide an output from each of the preamps. When used

in conjunction with the Power Amp In jacks (23), a stereo effects loop is formed allowing the use

of stereo delays and various effects.

Remote Switch (25)

This jack is provided for the connection of the supplied footswitch. The footswitch is a multi-function

type allowing you to select Clean, Crunch, or Lead and to defeat the Chorus effects. To use the

footswitch ensure that the footswitch plug is inserted fully into the jack and that the Select switch is

pressed in (down position) on the front panel.

22 23 24 23 24 25

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Pas de commentaire

Peavey TransChorus 210 Manuel d'utilisateur Page 6